Hardness measurement of thin hardened surface layers

Thin hardened surface layers produced by thermochemical treatment play an important role in improving the performance properties of metal products. Nitrocarburizing, nitriding, cyaniding, and carbonitriding are processes used to increase the hardness, wear resistance, and corrosion resistance of metal surfaces. Hardness measurement of such surface layers is an important step in treatment quality control and in verifying that the obtained properties meet the specified requirements. We have prepared recommendations for measuring the hardness of thin hardened surface layers, and in this article we will look at the most common methods.

Nitrocarburizing is a process of diffusion saturation of the steel surface with carbon and nitrogen. This method achieves high surface hardness and improved wear resistance. The hardness of nitrocarburized layers is usually measured with microhardness testers. These instruments make it possible to determine hardness at depths corresponding to the thickness of the treated layer, using the Vickers or Knoop scales.

Nitriding is a process of saturating the metal surface with nitrogen at elevated temperatures. This method provides high hardness and wear resistance, as well as corrosion resistance of products. The hardness of nitrided layers is measured using microhardness methods, which make it possible to determine how hardness changes with layer depth. Uniformity is an important characteristic of nitrided layers, and it is also controlled through microhardness measurements.

Cyaniding involves saturating the metal surface with nitrogen and carbon using cyanide salts at high temperatures. This method achieves high hardness and corrosion resistance of the surface layer. The hardness of cyanided layers is measured with microhardness testers, which provide hardness data at the micro level. This approach ensures measurement accuracy and makes it possible to control treatment quality.

Carbonitriding is a process of saturating the steel surface with nitrogen and carbon in an atmosphere of ammonia and carbon-containing gases. This method combines the advantages of carburizing and nitriding, achieving high hardness and wear resistance of the surface layer. The hardness of carbonitrided layers is measured using microhardness testers and optical microscopy methods, which provide detailed data on the hardness distribution through the depth of the layer.

Hardness measurement methods

Microhardness methods are most often used to measure the hardness of thin hardened surface layers. The most common methods are:

  • Vickers method. Measurement is performed by pressing a diamond pyramid into the material surface. The indentation depth and the size of the impression are used to determine the material’s hardness.
  • Knoop method. This method is similar to the Vickers method but uses an elongated (asymmetric) pyramid, which allows more accurate hardness measurement of thin layers and surfaces of limited thickness.
  • Rockwell method. Measurement is performed by pressing a steel ball or a diamond cone into the material surface. This method provides hardness data quickly but is less accurate for thin layers.
  • Berkovich method. It is used for high-precision microhardness measurement and provides data on the mechanical properties of surface layers.

Hardness measurement of thin hardened surface layers produced by nitrocarburizing, nitriding, cyaniding, and carbonitriding is critical for treatment quality control and for ensuring compliance with the specified requirements. Modern microhardness methods provide accurate data on hardness and treatment uniformity, which is a key factor in ensuring high performance properties of metal products.

Scroll to Top